JVC Portable CD Player RD T5BU User Manual

CD PORTABLE SYSTEM  
RD-T7GN  
RD-T5BU  
SNOOZE  
/DIMMER  
SLEEP  
STANDBY/ON  
1
4
2
5
3
6
7
8
9
10  
+10  
REPEAT  
TUNER  
BAND  
CD  
FM MODE  
BASS/TREBLE  
AHB PRO  
VOLUME  
REMOTE CONTROL RM-SRDT7  
[RD-T7GN Only]  
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located either on the rear, bot-  
tom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
LVT0737-003A  
[US,UJ]  
 
Caution: Proper Ventilation  
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:  
1 Front:  
No obstructions and open spacing.  
2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.  
3 Bottom:  
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.  
Front view  
Side view  
15 cm  
15 cm  
15 cm  
15 cm  
15 cm  
15 cm  
10 cm  
10 cm  
CAUTION  
1. Do not block the ventilation openings or holes.  
(If the ventilation openings or holes are blocked by a newspaper or  
cloth, etc., the heat may not be able to get out.)  
2. Do not place any naked flame sources, such as lighted candles, on  
the apparatus.  
3. When discarding batteries, environmental problems must be con-  
sidered and local rules or laws governing the disposal of these bat-  
teries must be followed strictly.  
4. Do not use this apparatus in a bathroom or places with water. Also  
do not place any containers filled with water or liquids (such as  
cosmetics or medicines, flower vases, potted plants, cups, etc.) on  
top of this apparatus.  
G-2  
 
Thank you for purchasing the JVC CD Portable System.  
We hope it will be a valued addition to your home as well as to your outdoor life, giving you years of enjoyment.  
Be sure to read this instruction manual carefully before operating your new stereo system.  
In it you will find all the information you need to set up and use the system.  
If you have a query that is not answered by the manual, please contact your dealer.  
Features  
Here are some of the things that make your System both powerful and simple to use.  
I The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the music.  
With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, or CD Player with  
a single touch. (When power is supplied from AC)  
I The System incorporates AHB (Active Hyper Bass) PRO circuitry to faithfully reproduce low frequency sounds.  
[RD-T7GN Only]  
I A 45-station preset capability 30 FM and 15 AM in addition to auto-seek and manual tuning.  
I A user-friendly timer lets you wake or fall asleep to music.  
I The CD Player can play back a CD-R and CD-RW.  
How This Manual Is Organized  
Basic information that is the same for many different functions - e.g. setting the volume - is given in the section ‘Common Operations’,  
and not repeated under each function.  
The names of buttons/controls are written in all capital letters: e.g. TUNER BAND.  
If the button names on the Unit and the Remote Control are the same, the description on which the button is used will be omitted.  
System functions are written with an initial capital letter only: e.g. Normal Play.  
Use the table of contents to look up specific information you require.  
We’ve enjoyed making this manual for you, and hope it serves you in enjoying the many features built into your System.  
IMPORTANT CAUTIONS  
1. Where to place the Unit  
I
Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C).  
Leave sufficient distance between the Unit and a TV.  
Do not use the Unit in a place subject to vibrations.  
2. Power cord  
I
Do not handle the power cord with wet hands!  
Some power is always consumed as long as the power cord is connected to the wall outlet.  
When unplugging the Unit from the wall outlet, always pull the plug, not the power cord.  
3. Malfunctions, etc.  
I
There are no user serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer.  
Do not insert any metallic object into the System.  
Table of Contents  
II  
Features .............................................................................. 1  
How This Manual Is Organized ......................................... 1  
IMPORTANT CAUTIONS ............................................... 1  
Specifications......................................................... 12  
Getting Started.......................................................... 2  
Common Operations................................................ 3  
Using the Tuner ........................................................ 5  
Using the CD Player ................................................. 7  
Using the Timers ...................................................... 9  
Care And Maintenance........................................... 11  
Troubleshooting ..................................................... 12  
1
 
Getting Started  
II  
Check that you have all of the following items, which are supplied with the System.  
Accessories  
Power Cord (1)  
Remote Control (1) [RD-T7GN Only]  
Batteries for Remote Control (2) [RD-T7GN Only]  
AC Plug Adaptor (1)  
If any of these items are missing, contact your dealer immediately  
Set the VOLTAGE SELECTOR Switch  
To avoid damaging the System, set the voltage before plugging in the System.  
Set the correct voltage for your area with the VOLTAGE SELECTOR switch on the back of the Unit. Use a screwdriver to rotate the selector  
so the number the arrow is pointed at is the same as the voltage.  
.
How To Put Batteries  
How To Put Batteries In the Unit  
1. Open the battery cover on the back of the Unit by pulling it toward you while pressing the tabs as shown by the arrows.  
2. Put 3 memory backup batteries R6P(SUM-3)/AA(15F) in the battery compartment in the order of 1to 3.  
3. Put 6 batteries R20/D (13F) in the battery compartment in the order of 1to 6as shown.  
4. Securely close the battery cover.  
Note: When you operate your Unit on mains (AC) power, the power source switches automatically from batteries to AC. However, you should  
remove the batteries when operating on AC power.  
1
2
2
3
3
5
1
6
4
“R6P (SUM-3) / AA (15F)” size batteries  
“R20/D (13F)” size batteries  
How To Put Batteries In the Remote Control  
Match the polarity (+ and ) on the batteries with the + and markings in the battery compartment.  
R6P(SUM-3)/AA(15F)  
CAUTION: Handle batteries properly.  
To avoid battery leakage or explosion:  
Remove batteries when the Unit or the Remote Control will not be used for a long time.  
When you need to replace the batteries, replace batteries at the same time with new ones.  
Do not use an old battery with new ones.  
Do not use different types of batteries together.  
Do not try to recharge non-rechargeable batteries.  
2
 
Using the Remote Control [RD-T7GN Only]  
The Remote Control makes it easy to use many of the functions of the Unit from a distance of up to 7m (23 feet) away.  
You need to point the Remote Control at the remote sensor on the Unit’s front panel.  
Note: If you point the Remote Control from the slant direction, the above distance will be shortened.  
Remote sensor  
Connecting the AC Power Cord  
Firmly insert the AC power cord supplied with the System into the AC inlet on the back of the Unit.  
CAUTIONS:  
ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM IN  
ORDER TO AVOID MALFUNCTION OR DAMAGE TO THE SYSTEM.  
BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN  
GOING OUT OR WHEN THE SYSTEM IS NOT IN USE FOR AN EXTEND-  
ED PERIOD OF TIME.  
AC IN  
Plug the AC power cord into the wall outlet, and your System is at your command!  
Common Operations  
II  
Display  
SNOOZE  
/DIMMER  
SLEEP  
STANDBY/ON  
1
4
2
5
3
6
STANDBY/ON  
7
8
9
MULTIJOG  
CLOCK/DISPLAY  
STANDBY indicator  
VOLUME  
10  
+10  
REPEAT  
VOLUME control  
(Jog dial)  
CD PORTABLE SYSTEM  
STANDBY/ON  
CLOCK/  
DISPLAY  
RANDOM/  
REPEAT  
BASS/  
TREBLE  
SLEEP  
ALARM  
TUNER  
BAND  
CD  
AHB PRO  
STANDBY  
BASS/TREBLE  
AHB PRO  
[RD-T7GN Only]  
TIMER  
CD/TUNER  
STANDBY/ON  
FM MODE  
P.TUNING  
BASS/TREBLE  
AHB PRO  
SNOOZE/DIMMER  
CD  
TUNER BAND  
AHB PRO  
VOLUME +, –  
BASS/TREBLE  
VOLUME  
SNOOZE/DIMMER  
[RD-T7GN]  
SNOOZE  
[RD-T5BU]  
REMOTE CONTROL RM-SRDT7  
[RD-T7GN Only]  
PHONES  
Turning the Unit Standby ——————  
Turning the Power On and  
Standby  
Press the  
button again.  
When operating on AC power:  
Turning the Unit On ————————  
Press the  
button.  
STANDBY/ON  
STANDBY/ON  
STANDBY/ON  
STANDBY/ON  
or  
STANDBY  
or  
STANDBY  
“GOOD BYE” is displayed and the display becomes blank, except  
for the clock display. The STANDBY indicator lights up.  
I When in Standby mode, the Unit continues to a small amount of  
power to run the display.  
I To switch off the Unit completely, unplug the AC power cord  
from the AC outlet.  
The STANDBY indicator goes out, and the display comes on, and  
“WELCOME” is displayed.  
The Unit comes on ready to continue in the mode it was in when the  
power was last turned off.  
I For example, if the last thing you were doing was listening to a  
CD, you are now ready to listen to a CD again. If you wish, you  
can change to another source.  
I If you were listening to the Tuner last, the Tuner comes on play-  
ing the station it was last set to.  
When power is supplied from the batteries:  
When the Unit is turned off with the  
button on the Unit (the  
button on the Remote Control is ineffective), the Standby in-  
dicator lights up and the display is blank.  
I To switch off the Unit completely, remove the batteries from the  
Unit.  
Note: When power is supplied from the batteries, the  
button  
on the Remote Control does not work.  
3
 
Adjusting the Volume  
Showing the Time (CLOCK/  
DISPLAY)  
You can adjust the volume level between MIN (0) and MAX (32)  
when the Unit is turned on.  
While listening to a CD or the radio, you can see the current time.  
To display the clock, press the CLOCK/DISPLAY button on the  
Unit.  
Turn the VOLUME control on the Unit to the right or left to in-  
crease or decrease the volume level.  
To return to the original display, press the same button until  
the original display appears.  
Note: You need to set the clock first in order for it to work. (See  
"Setting the Clock" on page 9.)  
OR  
Press the VOLUME + or button on the Remote Control to increase  
or decrease the volume level.  
Adjusting the Brightness  
(DIMMER) [RD-T7GN Only]  
When operated on AC power ————  
CAUTION: DO NOT turn on the Unit and/or start  
playing any source without first setting the  
VOLUME control to MIN (0) , as a sudden blast of  
sound can damage your hearing.  
You can adjust the brightness of the display's backlighting.  
When the Unit is turned on:  
Each time you press the SNOOZE/DIMMER button on the Unit or  
on the Remote Control, the backlight fully turns on or dims.  
For private listening  
Connect a pair of headphones to the PHONES jack. No sound  
comes out of the speakers.  
Be sure to turn down the volume before connecting or putting on  
headphones.  
When the Unit is turned off(Standby):  
Each time you press the SNOOZE/DIMMER button on the Unit or  
on the Remote Control, the backlight dims or turns off.  
When the Sleep Timer is on:  
You can also dims or turn off the backlight with these buttons.  
Reinforcing the Bass Sound  
(AHB PRO) [RD-T7GN Only]  
You can reinforce the bass sound to maintain rich, full bass at low  
volume (you can use this effect only for playback):  
To get the effect, press the AHB (Active Hyper Bass) PRO  
button.  
When operated on batteries ————  
When the Unit is turned on, you can turn on the backlighting of the  
display for a few seconds.  
Each time you press the SNOOZE/DIMMER button on the Unit or  
on the Remote Control, the backlight turns on for a few seconds.  
The BASSindicator lights up on the display.  
To cancel the effect, press the button again.  
The BASSindicator goes out.  
Using Batteries  
Power Batteries (6 pcs.):  
You can operate the System on batteries. When the batteries are  
exhausted, NO BATTwill appear on the display. In this case, re-  
place with the new batteries.  
Tone Control (BASS/TREBLE)  
You can control the tone by changing the bass and treble.  
Memory Backup Batteries (3 pcs.):  
Your settings such as the preset stations, clock and timer are backed  
up with this batteries.  
1. Press the BASS/TREBLE button until "BASS"  
I
or "TREBLE" appears on the display.  
Each time you press the button, the display changes as follows:  
BASS =TREBLE =original display =(back to the beginning)  
CAUTION:  
If memory backup batteries are exhausted or not  
installed, and the AC power cord is disconnected  
or there is a power failure, the settings you have  
made will be erased from memory in approx. half  
a day.  
2. Turn the Jog dial on the Unit or press the  
I
VOLUME +/button on the Remote Control  
to adjust the level.  
The bass or treble level changes between 6 and +6. (0: Flat)  
To exit the tone control mode, press the BASS/TREBLE but-  
ton until the original display appears, or wait for 15 seconds.  
To forcibly reset the bass and treble levels to 0 (FLAT),  
press the BASS/TREBLE button for 2 seconds or more.  
4
 
Using the Tuner  
II  
SNOOZE  
/DIMMER  
MULTIJOG  
SLEEP  
STANDBY/ON  
VOLUME  
1
4
2
5
3
6
CD PORTABLE SYSTEM  
STANDBY/ON  
CLOCK/  
DISPLAY  
RANDOM/  
REPEAT  
BASS/  
TREBLE  
SLEEP  
AHB PRO  
STANDBY  
I P.TUNING  
¢
4
CLOCK/DISPLAY  
TIMER  
CD/TUNER  
Number keys  
ALARM  
7
8
9
P.TUNING  
10  
+10  
REPEAT  
SNOOZE/DIMMER  
CD  
TUNER BAND  
TUNER  
BAND  
CD  
TUNER BAND  
TUNER BAND  
FM MODE  
4
¢
BASS/TREBLE  
AHB PRO  
Band display, Frequency display, Preset channel  
VOLUME  
REMOTE CONTROL RM-SRDT7  
[RD-T7GN Only]  
(Display when using the Tuner)  
You can listen to FM and AM stations. Stations can be tuned in  
manually, automatically, or from preset memory storage.  
2.Select a station using one of the following  
I
methods.  
I Manual Tuning  
Setting the AM Tuner Interval  
Spacing ——————————————  
When shipped, the AM tuner interval is set to 9 kHz spacing. You  
can change it to 10 kHz spacing.  
Press the 4or ¢button repeatedly to move from frequency  
to frequency until you find the station you want.  
To select 10 kHz intervals, while holding down the ¢button  
P.TUNING  
or  
on the Unit in Standby mode, press the  
button on the Unit to turn  
%
on the power (at the same time, the 100 kHz spacing is selected for  
FM broadcast).  
To select 9 kHz intervals again, while holding down the 4  
OR  
I Auto Tuning  
button on the Unit in Standby mode, press the  
button on the Unit  
If you press and hold the 4or ¢button for one second or  
more, the frequency changes down, or up, automatically until a  
station is found.  
%
to turn on the power.  
[10 kHz Intervals]  
[9 kHz Intervals]  
OR  
I Preset Tuning using the Unit (Possible only after pre-  
setting stations)  
STANDBY/ON  
STANDBY/ON  
STANDBY  
STANDBY  
Press the 7P.TUNING button to select the preset station.  
After you have selected the preset number, the band and the fre-  
quency are displayed.  
Note: When you change the setting, the preset stations are erased.  
Example:Press the 7P.TUNING button until the preset  
number 12 P- 12appears.  
You will need to preset the stations again. (See page 6.)  
One Touch Radio (AC power only)—  
Just press the TUNER BAND button to turn on the Unit and start  
playing the station you were last tuned to.  
I You can also switch from the CD Player to the radio by pressing  
the TUNER BAND button.  
OR  
I Preset Tuning using the Remote Control (Possible  
only after presetting stations)  
Tuning In a Station  
Select the station by entering its preset number on the number  
keys.  
1. Press the TUNER BAND button.  
Example:For channel 5, press 5. For channel 15, press +10  
then 5. For channel 25, press +10 twice, then 5.  
For channel 30, press +10 twice, then 10.  
I
The Band and Frequency you were last tuned to appear on the  
display.  
Each time you press the button, the band changes as follows:  
The band and the frequency are displayed.  
FM AUTO  
FM MONO  
AM  
3.Turn the antenna for best reception.  
I
For FM broadcast, extend the built-in wire antenna.  
For AM broadcast, turn the Unit itself.  
For FM  
For AM  
5
 
Manual Presetting (Using the Re-  
Presetting Stations  
mote Control) ————————————  
You can preset up to 30 FM stations and up to 15 AM stations into  
memory.  
TUNER  
BAND  
Number key(s)  
(hold for 2 seconds)  
Auto Presetting (Using the Unit) —  
In each band, you can automatically preset FM-30, AM-15 stations.  
Preset numbers will be allocated as stations are found, starting from the  
station currently tuned to and moving up the frequency.  
1.Select a band by pressing the TUNER  
I
BAND button.  
(for 2 seconds)  
TUNER BAND  
TUNER BAND  
4
¢
2. Press the  
or  
button to tune in a station.  
I
3. Set the preset number by pressing and hold-  
I
ing the number key on the Remote Control  
1. Select a band (AM or FM) by pressing the  
until STOREDappears on the display.  
I
TUNER BAND button.  
To preset numbers 1 to 10: Press the number key and hold  
it down for 2 seconds.  
2. Press the TUNER BAND button for more  
I
To preset numbers 11 to 19: Press and release the +10 but-  
ton, then press the second number key (1 to 9) and hold it  
down for 2 seconds.  
than 2 seconds.  
AUTOappears, and then auto presetting starts.  
To preset numbers 21 to 29: Press and release the +10 but-  
ton twice, then press the second number key (1 to 9) and  
hold it down for 2 seconds.  
To preset number 30: Press and release the +10 button 2  
times, then press and hold 10 button.  
3. Repeat steps 1-2 for the other band.  
I
I If you want to change any of the auto preset stations, follow the  
procedure for Manual Presetting.  
CAUTION: To prevent the preset stations from being  
erased because of a power failure, etc., install mem-  
ory backup batteries in the System.(See page 2.)  
Otherwise, they will be erased in approx. half a day.  
Example: Preset number = 12  
Manual Presetting (Using the Unit) —  
(Station Select)  
4.Repeat steps 1 - 3 for further presetting.  
To change the preset stations, repeat the same steps as above.  
I
TUNER BAND  
P.TUNING  
To Change the FM  
Reception Mode  
The STEREOindicator lights up and you can hear stereo effects,  
when a program is broadcast in stereo.  
(for 2 sec)  
P.TUNG  
(Press & hold )  
P.TUNG  
P.TUNG  
However if an FM stereo broadcast is hard to receive or noisy, you  
can select Monaural mode. Reception improves, but you lose any  
stereo effect.  
(Preset No. Select)  
1. Select a band by pressing the TUNER  
I
BAND button.  
Press the TUNER BAND button to select FM  
MONO mode.  
The MONOindicator lights up on the display.  
To restore the stereo effect, press the TUNER BAND button  
to select FM Auto mode (FMappears on the display.). The MO-  
NOindicator goes out.  
2. Press the 4or ¢button to tune in a sta-  
I
tion.  
3. Press the 7button for 2 seconds or more.  
I
The preset number and band/frequency are alternately  
displayed for 5 seconds.  
4. Within 5 seconds, repeatedly press the 7but-  
I
ton until the preset number you want  
appears, then press and hold the 7button  
until STOREDappears on the display.  
5. Repeat steps 1-4 for further presetting.  
I
To change the preset stations, repeat the same procedure as  
above.  
6
 
Using the CD Player  
II  
CD cover  
(including the display)  
SNOOZE  
SLEEP  
/DIMMER  
STANDBY/ON  
1
4
2
5
3
6
MULTIJOG  
VOLUME  
Number keys  
REPEAT  
7
8
9
CD PORTABLE SYSTEM  
STANDBY/ON  
CLOCK/  
DISPLAY  
JOG dial  
RANDOM/  
REPEAT  
BASS/  
TREBLE  
SLEEP  
ALARM  
REPEAT  
AHB PRO  
10  
+10  
STANDBY  
TIMER  
CD/TUNER  
7
TUNER  
BAND  
CD  
¢
4
CD38  
¢
P.TUNING  
FM MODE  
SNOOZE/DIMMER  
CD  
TUNER BAND  
BASS/TREBLE  
AHB PRO  
CD38  
7
4
VOLUME  
CD OPEN  
Playing time, Preset number  
Track number  
REMOTE CONTROL RM-SRDT7  
[RD-T7GN only]  
Random/Repeat indicator  
(Display when using the CD Player)  
You can use Normal, Random, or Repeat Play. Repeat Play can be  
set to repeat all or just one of the tracks on the CD.  
To stop playing the CD, press the 7button.  
The following information for the CD is displayed.  
Total number of tracks  
One Touch CD Player  
(AC power only) ——————————  
I Just press the CD38button.  
The power is automatically turned on. If a CD is already  
inserted, CDis displayed and the CD will start playing  
from the first track.  
Total playback time  
To pause, press the CD 38.  
To cancel pause, press the CD 38 again. Play continues from  
the point where it was paused.  
If no CD is inserted, NO DISCis displayed on the dis-  
play and the CD Player remains in Stop mode.  
CAUTION: Avoid getting your hand caught in the  
CD cover.  
Normal Play  
1. Press the CD OPEN button on the Unit.  
I
Notes:  
The CD cover (including the display) opens.  
You can place an 8 cm (3'') CD without an adaptor.  
If the CD cannot be read correctly (because it is scratched, for  
example), 0 0:00appears on the display.  
2. Place a CD, with its label side up.  
I
Skip Play (4 or ¢) ————————  
During playback, press the 4or ¢button to select the  
track you want.  
The selected track starts playing.  
Press and release the ¢button to go forward one track at a  
time.  
Press and release the 4button to go back one track at a time.  
I You can also skip the tracks in Stop mode.  
Search Play —————————————  
During playback, hold down the 4 or ¢ button.  
This operation will fast forward/backwards the CD so you can  
quickly find a particular passage in the track you are listening to (the  
CD is played slowly for a moment and then the playback speed in-  
creases).  
3. Press the CD OPEN button again to close  
I
the CD cover.  
Pressing the CD cover lightly will also close it.  
To close the CD cover and directly start playback, omit this  
step and go to the next step.  
4. Press the CD 38 button.  
I
Locating a Track directly with the  
Remote Control ———————————  
Using the number keys on the Remote Control allows you can go  
directly to the beginning of any track.  
During playback, enter the number of the track you want  
to listen to using the number keys.  
The first track of the CD begins playing.  
The CD Player automatically stops when the last track of the CD has  
finished playing.  
During playback, the track number being played and the play-  
back time elapsed are shown on the display.  
Track number  
The selected track starts playing.  
Example: For track 5, press 5. For track 15, press +10 then 5.  
For track 20, press +10, then 10. For track 32, press +10 three  
times, then 2  
Playback time elapsed  
.
7
 
RANDOM Play  
Repeat Play  
The tracks will play in no special order when you use this mode.  
One track or all the tracks on a CD will play repeatedly when you  
use this mode.  
(On the Unit)  
(On the Unit)  
1. In Stop mode, press the RANDOM/REPEAT  
I
button until the RANDOMindicator alone  
1.In Stop mode, press the RANDOM/REPEAT  
Ibutton.  
lights up on the display.  
Each time you press the button, the Random/Repeat indicator  
changes as follows.  
Each time you press the button, the Random/Repeat indicator  
changes as follows.  
P =P ALL =P RANDOM = RANDOM (Random  
Play mode) =blank display =(back to the beginning)  
P = P ALL = P RANDOM = RANDOM = blank  
display =(back to the beginning)  
P :  
P ALL:  
P RANDOM:  
Will repeat one track.  
Will repeat all the tracks.  
Will repeat all the tracks in random order.  
2. Press the CD 38 button.  
I
All the tracks are played back in random order once, then the  
CD stops.  
2.Press the CD 38 button.  
Repeat playback starts.  
To stop Repeat Play, press the I button.  
During playback, skip play and search play can be done in the  
similar manner as for Normal Play mode, using the 4or ¢  
button.  
I
To stop Random Play, press the I button.  
To cancel Repeat Play mode, in Stop mode, press the RAN-  
DOM/REPEAT button until the Random/Repeat indicator goes out,  
or press the I button. Pressing the CD OPEN button to open the CD  
cover will also cancel Repeat Play mode.  
To cancel Random Play mode, in Stop mode, press the RAN-  
DOM/REPEAT button until the RANDOMindicator goes out, or  
press the I button. Pressing the CD OPEN button to open the CD  
cover will also cancel Random Play mode.  
(On the Remote Control) [RD-T7GN Only]  
1.In Stop mode, press the REPEAT button.  
I
Each time you press the button, the Repeat indicator changes as  
follows.  
P = P ALL =blank display =(back to the beginning)  
P :  
Will repeat one track.  
P ALL: Will repeat all the tracks.  
2.Press the CD 38 button.  
I
Repeat playback starts.  
To stop Repeat Play, press the I button.  
To cancel Repeat Play mode, in Stop mode, press the REPEAT  
button until the Repeat indicator goes out, or press the I button.  
Pressing the CD OPEN button to open the CD cover will also cancel  
Repeat Play mode.  
8
 
Using the Timers  
II  
SNOOZE/  
SNOOZE  
/DIMMER  
SLEEP  
STANDBY/ON  
SLEEP  
1
4
2
5
3
6
DIMMER  
7
8
9
MULTIJOG  
VOLUME  
SLEEP  
10  
+10  
REPEAT  
CD PORTABLE SYSTEM  
STANDBY/ON  
CLOCK/  
Jog dial  
TUNER  
BAND  
CD  
RANDOM/  
REPEAT  
BASS/  
TREBLE  
DISPLAY  
SLEEP  
ALARM  
AHB PRO  
STANDBY  
CLOCK/DISPLAY  
CD/TUNER TIMER  
ALARM TIMER  
TIMER  
CD/TUNER  
FM MODE  
P.TUNING  
BASS/TREBLE  
AHB PRO  
SNOOZE/DIMMER  
CD  
TUNER BAND  
VOLUME  
SNOOZE/DIMMER  
[RD-T7GN]  
REMOTE CONTROL RM-SRDT7  
SNOOZE  
Timer 2 indicator  
Timer 1 indicator  
[RD-T5BU]  
SLEEP indicator  
[RD-T7GN Only]  
(Display when using the Timer)  
(On the Unit)  
The timers let you control listening a music source as well as an  
alarm tone.  
1.Press the CLOCK/DISPLAY button for 3 sec-  
Three types of timers are available.  
I
onds or more.  
CD/Tuner Timer (  
TIMER1):  
The hour digits blink.  
Use this timer to wake you up to music from a CD or tuner.  
2.Turn the Jog dial to set the hour.  
Alarm Timer ( TIMER2):  
Use this timer as an alarm clock.  
I
3.Press the CLOCK/DISPLAY button.  
I
The minute digits blink.  
Sleep Timer:  
Use this timer to fall asleep to music. Your System turns off auto-  
matically after a certain length of time.  
4.Turn the Jog dial to set the minute.  
I
5.Press the CLOCK/DISPLAY button.  
I
CAUTION: If memory backup batteries are ex-  
hausted or not installed, and the AC power cord is  
disconnected or there is a power failure, time set-  
tings will be erased from memory in approx. half  
a day. Then, the display blinks 0:00. If this hap-  
pens, set the current time (clock) and perform the  
timer setting again.  
CLOCK OKappears for 2 seconds. The selected time is set  
and the seconds start counting from 0.  
. Setting the CD/Tuner Timer  
The CD/Tuner timer is turned on at the set time so that you can wake  
up to music from a CD or tuner. The volume fades in when the Unit  
turns on. The System will automatically turn off in 1 hour.  
Note: Perform each setting step within 30 seconds. Otherwise,  
setting is cleared and the procedure must be repeated from  
the beginning.  
Setting the Clock  
When the Unit is operated on AC power or batteries for the first  
time, the time indication 0:00will blink on the display and you  
need to set the clock.  
(On the Unit)  
You can set the clock whether the Unit is turned on or off (Standby)  
if the AC power is supplied to the Unit.  
1.Press the CD/TUNER TIMER button.  
I
The current hour digits blink. Also, the Timer 1 indicator  
Notes:  
(
TIMER1) blinks.  
The clock must be correctly set for the timer to work.  
The clock may gain or lose 1 to 2 minutes per month.  
Perform each setting step within 30 seconds. Otherwise, setting is  
cleared and the procedure must be repeated from the beginning.  
2.Turn the Jog dial to set the hour.  
I
3.Press the CD/TUNER TIMER button.  
I
The current minute digits blink.  
MULTIJOG  
MULTIJOG  
VOLUME  
VOLUME  
CLOCK/  
CLOCK/  
CLOCK/  
DISPLAY  
DISPLAY  
DISPLAY  
4.Turn the Jog dial to set the minute.  
I
5.Press the CD/TUNER TIMER button.  
I
(for 3 sec)  
The current source name blinks.  
6.Turn the Jog dial to set the source.  
I
The source name alternates between CDand TUNER.  
9
 
7. Press the CD/TUNER TIMER button.  
8.Turn off the Unit (Standby mode).  
I
I
The current volume level blinks.  
When the set time comes, the Unit automatically turns on and  
sounds an alarm tone for 15 minutes.  
During sounding an alarm tone, the Timer 2 indicator  
8. Turn the Jog dial to set the volume level.  
I
The volume level changes between VOL 1and VOL 31.  
(
TIMER2) blinks. After that, the indicator remains lit again.  
To stop the alarm tone, press the ALARM TIMER button or  
turn off the Unit.  
To cancel the timer, press the ALARM TIMER button to turn  
9. Press the CD/TUNER TIMER button.  
I
The CD/Tuner timer is set and the Timer 1 indicator  
(
TIMER1) remains lit.  
off the Timer 2 indicator (  
To reactivate the timer, repeatedly press the ALARM TIMER  
button until the Timer 2 indicator ( TIMER2) remains lit again.  
TIMER2).  
10.  
IIPrepare the music source according to the  
source set in step 6.  
CD: Load a CD.  
TUNER: Tune to a station you want to listen to.  
To confirm the timer settings, repeatedly press the ALARM  
TIMER button.  
To change the timer settings, repeat the setting procedure  
from the beginning.  
11.  
IITurn off the Unit (Standby mode).  
When the set time comes, the Unit automatically turns on and  
5-Minute Snoozing (SNOOZE)  
plays the source. During this time, the Timer 1 indicator  
(
TIMER1) blinks.  
When the CD/Tuner timer or Alarm timer turns on, if you wish, ac-  
tivate 5-minute snoozing function to temporarily stop playing  
source or sounding an alarm tone.  
To cancel the timer, press the CD/TUNER TIMER button to  
turn off the Timer 1 indicator ( TIMER1).  
To reactivate the timer, repeatedly press the CD/TUNER TIM-  
While the timer is activating, press the SNOOZE button.  
CD/Tuner timer: The Unit turns off for 5-minute for snoozing.  
Alarm timer: The alarm tone stops for 5-minute for snoozing.  
ER button until the Timer 1 indicator (  
TIMER1) remains lit  
again.  
Note:  
To confirm the timer settings, repeatedly press the CD/TUN-  
ER TIMER button.  
The maximum number of times to repeat snoozing for the CD/  
Tuner timer is limited to 10.  
To change the timer settings, repeat the setting procedure  
from the beginning.  
.
Setting the SLEEP Timer  
Use the Sleep Timer to turn the Unit off after a certain number of  
minutes when it is playing. By setting the Sleep Timer, you can fall  
asleep to music and know that your Unit will turn off by itself rather  
than play all night.  
Setting the Alarm Timer  
The Alarm timer (alarm clock) is turned on at the set time to wake  
you up. Alarm tone fades in, and 2 minutes later, its frequency be-  
comes higher. The alarm tone continues for 15 minutes and then au-  
tomatically stops.  
I You can only set the Sleep Timer when the Unit is on and a  
source is playing.  
Note:  
Perform each setting step within 30 seconds. Otherwise, setting is  
cleared and the procedure must be repeated from the beginning.  
1. Play back a CD or tune in to a desired sta-  
I
tion.  
(On the Unit)  
2. Press the SLEEP button.  
I
The SLEEPindicator blinks.  
1. Press the ALARM TIMER button.  
I
The current hour digits blink. Also, the Timer 2 indicator  
3. Set the length of time you want the source  
I
(
TIMER2) blinks.  
to play before shutting off.  
Each time you press the SLEEP button, it changes the  
number of minutes shown on the display in this sequence:  
2. Turn the Jog dial to set the hour.  
I
3. Press the ALARM TIMER button.  
=10 =20 =30 =60 =90 =120 =Cancelled =(back  
to the beginning)  
I
The current minute digits blink.  
The SLEEPindicator will stop blinking after 5 seconds and re-  
mains on. Then, the display returns to the one before you set the  
Sleep Timer.  
The Unit is now set to turn off after the number of minutes you have  
set.  
4. Turn the Jog dial to set the minute.  
I
5. Press the ALARM TIMER button.  
I
The current alarm tone blinks.  
6. Turn the Jog dial to set the alarm tone  
To Confirm the Sleep Time  
When the SLEEP button is pressed, the remaining sleep time is dis-  
played. After 5 seconds the original display returns.  
I
level.  
The alarm tone level changes between LEVEL 1and LEV-  
EL 7.  
To Cancel the SLEEP Timer Setting  
Press the SLEEP button until the SLEEPindicator goes off on the  
display. Turning off the Unit also cancels the SLEEP Timer.  
7. Press the ALARM TIMER button.  
I
The Alarm timer is set and the Timer 2 indicator (  
TIMER2)  
remains lit.  
10  
 
Care And Maintenance  
II  
Compact Discs  
Handle your CDs carefully, and they will last a long time.  
Only CDs bearing these marks can be played  
with this Unit.  
Recordable  
ReWritable  
Continued use of irregularly shaped CDs  
(heart-shape, octagonal, etc.) can damage the  
Unit.  
Remove the CD from its case by holding it at  
the edges while pressing the case's center hole  
lightly.  
Do not touch the shiny surface of the CD, or  
bend the CD.  
Put the CD back in its case after use to prevent  
warping.  
Be careful not to scratch the surface of the CD  
when placing it back in the case.  
Avoid exposure to direct sunlight, temperature  
extremes, and moisture.  
A dirty CD may not play correctly. If a CD is  
dirty, wipe it with a soft cloth in a straight line  
from center to edge.  
CAUTION: Do not use any solvent (for example,  
conventional record cleaner, spray thinner, ben-  
zine, etc.) to clean a CD.  
Moisture Condensation  
Moisture may condense on the lens inside the  
Unit in the following cases:  
After turning on heating in the room.  
In a damp room.  
If the Unit is brought directly from a cold to  
a warm place.  
Should this occur, the Unit may malfunction. If  
this happens, leave it turned on for a few hours  
until the moisture evaporates, unplug the AC  
power cord, and then plug it in again.  
General Notes  
To ensure top performance, keep your CDs and the mechanism clean.  
Store CDs in their cases, and keep them in cabinets or on  
shelves.  
Keep the CD cover closed when not in use.  
11  
 
Troubleshooting  
If you have a problem with your System, check this list for a possible solution before calling for service.  
If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your  
dealer, for service.  
II  
Symptom  
Possible Cause  
Action  
Connect it firmly  
No sound is heard.  
The power cord is disconnected.  
The batteries in the Unit have lost  
their charge.  
Replace the batteries.  
Headphones are connected.  
Disconnect the headphones.  
Poor AM reception  
Poor FM reception  
The System is not properly positioned.  
Turn the System to the best reception  
position.  
The FM antenna is not properly posi-  
tioned.  
Extend the FM antenna and turn it to the  
best reception position.  
The CD skips.  
The CD is dirty or scratched.  
Clean or replace the CD.  
The CD does not play.  
The CD is upside down.  
Put the CD in with the label side up.  
Unable to operate the Remote Control.  
The path between the Remote Con-  
trol and the sensor on the Unit is  
blocked.  
Remove the obstruction.  
The batteries have lost their charge.  
Replace the batteries.  
Operations are disabled.  
The built-in microprocessor has mal-  
functioned due to external electrical  
interference.  
Unplug the Unit then plug it back in.  
Specifications  
Amplifier  
Output Power  
(Max.) 5 W (2.5 W + 2.5 W) at 4 ohms  
(10% THD) 4 W (2 W + 2 W) at 4 ohms  
Output Sensitivity/Impedance (1 kHz)  
Phones 32 ohms - 1 kohm  
0 mW - 20 mW/ch output into 32 ohms  
II  
General  
!"#$%&"'%& 438 mm 175.5 mm 261.5 mm  
(W/H/D)  
()&& Approx. 2.5 kg (without batteries)  
Accessories  
Power Cord (1)  
Remote Control (1)  
[RD-T7GN Only]  
Batteries for Remote Control R6 (SUM-3)  
/AA (15F) (2) [RD-T7GN Only]  
AC Plug Adaptor (1)  
CD Player  
Signal-To-Noise Ratio 90 dB  
Wow And Flutter Unmeasurable  
Tuner  
Power Specifications  
Power Requirements AC 110 - 127 V / 220 - 240 V ~ , adjustable  
with the voltage selector, 50/60 Hz  
*'+$,-.'%&/#01"'% 10 watts (power on mode)  
1.8 watts (in Standby mode)  
FM Tuner  
Tuning Range 87.5 MHz - 108.0 MHz  
AM Tuner  
Tuning Range 531 - 1 710 kHz (at 9 kHz channel space)  
530 - 1 710 kHz (at 10 kHz channel space)  
Antenna Built-in wire antenna for FM  
Built-in ferrite core antenna for AM  
!"#$%&'(&)'#*"+$,$+(-$.&#'(/"'#012"+-'-.'+3(&%"'4$-3.0-'&.-$+"5  
Speakers  
8 cm 2, 4 ohms  
12  
 
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and  
U.K.)  
IMPORTANT for mains (AC) line  
234563-*7899:;9- :;<- ='->?$>@- 1?)1- A'/,- #)"%&  
BC.D-E"%$-F'E1)G$->',,$&0'%=&-+"1?-1?$-0'&"1"'%-'H-1?$  
F'E1)G$-&$E$>1',-&+"1>?-0,'F"=$=-'%-1?$-'/1&"=$-'H-1?"&  
$I/"0#$%1-)%=<-"H-="HH$,$%1<-,$&$1-1?$-F'E1)G$-&$E$>1',  
&+"1>?<-1'-0,$F$%1-H,'#-)-=)#)G$-',-,"&@-'H-H",$J$E$>1,">  
&?'>@K  
VICTOR COMPANY OF JAPAN, LIMITED  
EN, CH  
0601TTMCREHIT  
 

Intel Computer Hardware MI935 User Manual
IPUX Security Camera CS101A User Manual
Jacuzzi Hot Tub BP81 User Manual
Jensen Turntable SB6060 User Manual
Jet Tools Planer JWP 16OS User Manual
Karcher Pressure Washer K 395 M User Manual
Kenmore Range 790 7851 User Manual
Kenmore Water Dispenser 625343420 User Manual
Kenwood Stereo Amplifier X1200M User Manual
Kramer Electronics Stereo System VA 256D User Manual